Plb-wa3d manual

Follow the steps below to prepare for installing the TV. Do not remove any other screws from the TV. Be careful not to pinch your fingers when adjusting the angle of the Mounting Hook. Lift the TV off the stand. Make sure that you carry out this task with at least two or three people. Do not attempt to lift the TV by yourself. When installing the TV parallel to the wall 0 degrees , adjustment of the Mounting Hook angle procedures 1 and 2 below is not necessary.

Make sure that each arm base X is screwed in securely. Choose the holes corresponding to the desired angle 5, 10, 15 or 20 degrees. When installing the TV onto the Base Bracket. Hydrastar Mounting Bracket More information. Atlantis Energy Systems Inc. More information. Transformers Animated Blackarachnia Instructions More information. Measure where to position the brackets.

Drill holes and position the supplied screws H and I. Install the frame as a test first. Top bracket method Top frame Side bracket method Side frame Top frame to fly 7. Assemble the frame installation tool J 5. Secure the mounting bracket C with provided screws to the previously inserted nuts.

Position the frame on the frame installation tool and lean against the wall. Connect the 2 frame pieces with the supplied connection bracket and secure this with the inserted hex screws.

Connect the top and bottom frame with the spreader bar and connect this by using the two supplied screws D. Carefully unpack the screen surface and put on the supplied gloves K before handling the surface. Position the roller with the projection surface upright in front of the frame. Then from left to right, unroll the projection surface while folding the surface around the frame and attaching it to the velcro.

This will require 2 people. First tension the surface so the end of the surface alligns with the frame end. After the entire screen is attached, you can adjust tensioning where necessary. When the fabric is attached on top, attach the fabric on the sides. Then rotate the frame and attach the remaining surface at the top.