How to enable wake on lan in windows 7

And if you want to make your computer work correctly while you are operating it from miles away, you better get your hands on the best WOL Software from ITTSystems. Kind of cool right? To begin the process, you have to make sure you have all the configuration settings for WoL turned on.

Make sure that you have done all these steps carefully. After all the above steps, make sure that you have turned on the service located in administrator tools. To wake up your personal computer with WoL setup you have to send a Magic Packet to wake your machine up.

Do you want to turn on your computer remotely? How does this happen? First of all, you need to go into the properties of your Ethernet Port which is currently in use and active.

To go into the properties, right-click the available adapter and select properties. This opens a dialog box. Then go to Power Management. There you will see 3 boxes. Check all those boxes. Then go to the windows firewall settings and open UDP for port 9. Typically, such an event is a specially constructed Ethernet packet. In Windows 7, the default shutdown operation puts the system into the classic shutdown state S5. And all devices are put into the lowest power state D3.

WOL from S5 isn't officially supported in Windows 7. However, some network adapters can be left armed for waking if enough residual power is available. So waking from S5 is possible on some systems if enough residual power is supplied to the network adapter, even though the system is in the S5 state and devices are in D3. In Windows 10, the default shutdown behavior puts the system into the hybrid shutdown also known as Fast Startup state S4. And all devices are put into D3. Network adapters are explicitly not armed for WOL in these cases, because users expect zero power consumption and battery drain in the shutdown state.

Call us anytime for your technical support needs. Let us come out to your business and perform a comprehensive onsite network evaluation. Fill out the form on the sidebar to schedule your appointment. You must be logged in to post a comment. By Default most Ethernet Ports are set to have this enabled by default but still check to make sure they are enabled. Leave a Reply Want to join the discussion?

Feel free to contribute!